receiver modules electro - optical systems inc, 1039 we st bridge st, phoenixville, pa 19460 tel: 610-935-5838 (fax: -8548) www. eosystems.com sales@eosystems.com specifications @ 77k detector top: 2mm dia insb photodiode bottom: 2mm x 2mm mct12 detector spectral range 2 ? 5.5 m, pk ~ 5.0 5.5 ? 14 m, pk ~ 12. responsivity-v/w @ pk,amp output 10 5 / 10 4 10 5 / 10 4 noise- v/hz 1/2 @ 1000hz 1.8 x 10 -7 / 1.8 x 10 -8 0.7 x 10 -6 / 0.7 x 10 -7 d*(pk)- cm . hz 1/2 /w @ pk 1.0 x 10 11 3.0 x 10 10 bandwidth (-3db)- hz dc ? 50k 5 ? 50k dewar ln 2 hold time 12 + hours power requirements +/- 9vdc to +/- 15 vdc, 40 ma connections bnc signal with 3 lead shielded power cable. red = +v, black = -v, white/shield = ground note: a db9 connector is provided on units purchased with optional ps-1 low noise power supply 2.625 dia 1.45 fill port cap 0.5" dia port .300 nom outer window surface to detector 2.50 dia 6.75 evacuation port/plug 4.0 power cable top output bnc bottom output bnc bottom gain select top gain select db-9 part no : is/mct(12)-020-e/ln6
|
